Fornitori si nasce, partner si diventa

Facebook

Products Cold Rooms for Bodies Prefabricated Cold Rooms Structural Characteristics

Universal Block Structural Characteristics

INTERNAL STRUCTURE

Inside the cold store is equipped with a couple of stainless steel shaped profiles, completed with a series of rolls or a sliding system, for each body place, allowing the placing of coffins and eventually of stretchers (supplied as accessory on request).

WALLS, CEILING AND DOORS

Made of PREPAINTED and self-extinguishing steel plate complying with sanitary norms.

FLOOR

Trampling floor made of plastic-zinc plate with rigid PVC film having a thickness of 200. It is grey, anti-slip, non-toxic, self-extinguishing and complies with the sanitary norms. Four height adjustable feet allow a perfect lining compensating the differences of level up to 0,5 cm.

THERMIC INSULATION

Thermic insulation is given by stiff self-extinguishing polyurethane foam according to the Norms ASTM D 1692, density 40 Kg/m3 absent CFC content. Very good thermic, chemical and dimesional stability.

 

Inside the cold store is equipped with a couple of stainless steel shaped profiles, completed with a series of rolls for each body place, allowing the placing of coffins and eventually of stretchers (supplied as accessory on request).

REFRIGERATING PLANT

The refrigerator plant that is smaller to work at a temperature from 0°C / -5%, is made with high quality materials and with components of the best trademarks of the sector. On the series UNIVERSAL-BLOCK the plant is made only in the mono block version and it is composed by the condensing unity that is directly linked to the evaporating unity and the electronic control panel.

  • BODYWORK: in painted steel plate and structured with removable panels for an easy maintenance.
  • COMPRESSOR: it’s gasproof and cooled by the suctioned gas; it is equipped with an integral protection engine with
    electronically adjusted thermistors. Ecological gas. The gas spreading is carried out using a capillary tube or the thermostic valve. The nominal powers are indicated in the proper illustration charts.

 

BATTERIES, ELECTRIC FANS AND DEFROSTING

The thermic exchange batteries (evaporator and condenser) are made of copper tubes; the aluminium chassis and finning have a wide exchange surface. The electric fans for evaporation are hermetic. The defrosting with the hot gas system and the electric resistances prevent the condensate loss.

CONTROL PANEL

It is completely automatic and programmed to control all the plant functions. An electronic gearcase allows to adjust the tools according to the different needs (thermostat, operation set with min/max values, choice of the defrosting type, start delay of the evaporator fans, stop time after defrosting for the discharger drainage, temperature alarm, feeler breaking, internal lighting, protection on the number of interventions on the thermostat).

STANDARD EQUIPMENT
  • light inside the cold store through a micro-switch located on the doors with following plant switching off with opened door;
  • digital reading electronic control panel;
  • alarm for temperature changes of functioning problems;
  • water discharging drain placed on the cold store floor;
  • adjustable feet with Teflon base and stainless steel pin.

 

EXTRA ACCESSORIES
  • wheels
  • stainless steel stretchers
  • auxiliary stand-by refrigerating plant

 

ASSEMBLING AND FUNCTIONING

With the cold stores UNIVERSAL-BLOCK Ceabis has developed a product with small sizes and, so, the assembling is made in our company allowing an easy shipment directly to the customer. For the installation it is only necessary to place the box and make all the electrical connections without any difficulties. It is, however, necessary to check the characteristic of the accesses and of the locals where the plant is placed with the total sizes.
On request, the installation can be made by a technician from Ceabis who is available to make some verifications directly in the place.

MONOBLOC PLANT CHART OF SIZE AND MINIMUM SIZES OF THE LOCAL INSTALLATION MONOBLOC

Ceabis - Ingombei Celle frigorifere prefabbricate per salme

The refrigerating group is formed by a monobloc including the condensing unit, the evaporating unit and the electronic control panel. This allows a complete test of the refrigerating unit and allows an immediate service because it’s ready to be used (except for the electric connection), reduced times and costs of maintenance and small sizes. The range UNIVERSAL-BLOCK requires the placing of the monobloc ONLY ON CEILING.